Before the concrete mixer with lift works, to check the oil, the circuit and the control equipment in each lubrication part, and fill the lubricating oil as required. But there are many lubrication places, and different parts, different lubrication amount. and the users should pay special attention to the differences.

Must keep the cleanness of whole concrete mixer with lift. To remove the dirt and obstructions in the airframe, especially the mixing blades of the concrete mixer with lift or the foreign matter between the side blade and the inner wall of the tank.

The daily check is essential work each day.Before the daily work, it is necessary to check whether the drive clutch and the brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, whether there is any obstacle around and the lubrication of each part, etc.;

The concrete mixer with lift must take the two level leakage protection. Once the power supply before work, the operator must check the power carefully. After the empty test, to start the concrete mixer with lift;

Before the concrete mixer with lift works, to add the water into the mixing tank to run for 1 to 2 seconds, and check the reliability of the clutch and the brake.